Make your own free website on Tripod.com

HURCONOTES.COM

ATC Operation
Home
Training Videos
Machine Start Up
Machine Shut Down
ATC Operation
Machine Modes
Starting a Prgram
Program Basics
Part Setup
Part Setup Center of Part
Tool Setup
Importing Tools
Tool Probing
Probing - Calibration
Speeds and Feeds
RS232
Holes
Milling a Thread
Safe ATC Position
Useful Links

WinMax ATC operation is diffrent than on the older Hurco controls...

If you have a Tall Part or Long Tools turn on your Safe ATC !

 

CHANGING  TOOLS – METHOD 1

Manual Machine Mode - Tool Management 

 

1.  Press the Manual Machine Mode button

2.  Press the Tool Management Softkey

3.  Enter the tool you want in the Next Tool field then Enter

4.  Press the Tool changer Auto button

6.  Press the flashing Start Cycle button

     Close the Doors MACHINE WILL MOVE”

 

CHANGING  TOOLS – METHOD 2

1.  Press the Input button

2.  Press the Tool Review Softkey

2.  Press the Tool Setup Softkey

3.  Type in tool# for the tool you want then press the Enter button

4.  Press the Tool changer Auto button

5.  Press the flashing Start Cycle button

“Close the Doors MACHINE WILL MOVE

Enter supporting content here

tom@amamc.com Toms Cell 781-801-2500